HFAN-02.5.0: Single-Ended vs Differential Methods of Driving a Laser Diode

May 25 2004

Abstract

A proper interface circuit to connect a driver to a laser diode is essential for an optimized optical transmitter design. In general, single-ended drive of laser diodes provides a straight forward solution that requires less components and board space. The purpose of this application note is to reveal how differential drive provides a faster edge-speed than a single-ended drive. Read full article.

Add to myAnalog
Download Article
220.00K
Add to myAnalog

Add article to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Related to this Article

Products

MAX3735A

2.7Gbps, Low-Power SFP Laser Drivers
MAX3737
NOT RECOMMENDED FOR NEW DESIGNS

Multirate Laser Driver with Extinction Ratio Control
MAX3738
NOT RECOMMENDED FOR NEW DESIGNS

155Mbps to 4.25Gbps SFF/SFP Laser Driver with Extinction Ratio Control
modal bookmark icon

{{modalTitle}}

modal close icon

{{modalDescription}}

{{dropdownTitle}}

input down arrow
  • {{defaultSelectedText}}
    • {{#each projectNames}}
  • {{name}}
    • {{/each}} {{#if newProjectText}}
  • plus icon {{newProjectText}}
    • {{/if}}
{{#if toggleButtonDescription}}
{{toggleButtonDescription}}
{{/if}} {{#if newProjectTitle}}

{{newProjectTitle}}

{{projectNameErrorText}}

{{/if}}

Latest Media 21

Subtitle
Learn More
Add to myAnalog

Add article to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project